Associated Scientific & Engineering Works

CONCRETE Mixer PAN Type Laboratory\Model, Motorized: Light weight Laboratory Concrete mixer is designed to remove the burdensome work of hand mixing Uniform, thoroughly mixed batches can be produced in the field or laboratory.Mounted on a sturdy rubber tired stand. Drum is mounted for end discharge. Equipped with end towing pole. The efficient mixing of concrete is essential if quality specimens are to be manufactured. Pan type mixers are suitable for the mixing of small quantities of concrete in the laboratory for making test samples. The mixer is designed to give efficient mixing of both dry and wet materials.The mixing pan is removable and tilts for easy access to the pan and emptying on completion of the mixing operation. The total volume of the pan is 100 litres but the effective capacity of the mixer is 56 litres.The mixer head lifts clear to provide maximum access to the pan and holds the mixing blades at a constant depth during the mixing operation. The blades can be adjusted to suit the different types and volume of materials to be mixed. All parts of the protected mixer are non-corrosive painted and galvanized.

Additional Information:

• Item Code: ASEW-165

Our company is engaged in manufacturing and supplying a wide range of Concrete Test Hammer, which is an instrument easy to use, for quick and approximate measurement of the resistance to pressure of manufactured concrete products. It works on the principle that the rebound of an elastic mass impacting on a surface is a function of the hardness of the surface itself. Hence the harder the surface, the greater is the rebound distance.Specifications: ASEW-129: Concrete Test Hammer BS 1881 -202,ASTM C 805The Method is based on the principal that the rebound of an elastic mass depends on the hardness of the surface which it strikes. The Test is fast & unlikely to cause damage to the concrete.The hammer is intended for testing the quality of concrete in finished structures such as buildings and bridges. Supplied complete with carrying case and carborundum stone, the hammer is suitable for testing concrete with Compressive Strengths of 10 to 70 N/mm 2. Weight 1.4 Kgs.

Compression Testing Machine to test cement, brick and concrete is offered by us. The range we offer includes Manually (Hand) Operated, Semi Automatic Compression Testing Equipment, Electrically Cum Manually Operated equipment and more. These strength testing equipment are extremely handy and are easy to use for testing cement, concrete and mortar cubes. We lay utmost importance on equipment design and construct with emphasis on ease of operation. As present day buyers expect more power, speed and highest level of accuracy in material testing system, we continue to offer research based Compressive Strength Testing Equipment of international standard, at affordable prices.

The Digital Concrete Test Hammer couples with rebound measuring sensors and microprocessor technology to provide an instrument designed for applications requiring numerous measurements. The method is rapid, reproducible, and has resolution previously unattainable by manual models. 

Additional Information:

• Production Capacity: 10
• Delivery Time: 15 DAYS

We design light weight Concrete Mixer to remove the burden some works of hand mixing. Uniform mixed batches can be obtained in the filed or laboratories. The counter balance-mixing drum can be easily tilted. The total drum volume is two cubic feet. This drum is mounted on a sturdy rubber tired stand. Drum is mounted for end discharge. These are equipped with end towing poles. The stable power consumption of these mixtures is 440 V, 3 phase, 50 cycle AC Supply.

We are engaged in manufacturing and supplying Concrete Compression Testing Machines, which is available in both manual and electrically types. The machine is fitted with control which enables the rate of application of load to be varied. The machine is equipped with facilities for hand operation as well.

Other details:

• ASEW-095:
• Compression Testing Machine, hand operated, 2000 Kn (200 tonne),
• Channel Model: Fitted with double plunger pump and hydraulic Load gauge 0-2000 KN cap
• ASEW-096:
• Compression Testing Machine, hand operated, 2000 KN (200 tonne), 2 or 4 Pillar model, with separate pumping unit connected by a copper/rubber hose pipe, double plunger with pressure gauge 0-2000 KN capacity
• ASEW-097:
• Compression Testing Machine, 250 KN (25 tonne) Electrically-cum-manually operated TWO/FOUR PILLAR MODEL
• Compression Testing Machine, 500 KN (50 tonne) Electrically-cum-manually operated
• ASEW-099:
• Compression Testing Machine, 1000 KN (100 tonne) cap. Electrically-cum-manually operated. 2 or 4 PILLAR MODEL
• ASEW-100:
• Compression Testing Machine, 1000 KN (100 Tonne)cap. Electrically-cum manually operated. 2 or 4 PILLAR MODEL : with two pressure gauges i.e. 0-500 KN x 2.5 KN divn. and 0-1000 KN x 5 KN/ divn
• ASEW-101:
• Compression Testing Machine, 2000 KN (200 Tonne) cap. Electrically-cum-manually operated. 2 or 4 pillar model
• ASEW-102:
• Compression Testing Machine, 2000 KN. (200 tonne) cap
• Electrically-cum-manually operated with two
• Load gauges 2 or 4 Pillar Model. 0-1000 KN x 5 KN/divn. and 0-200 KN x 10 KN/divn
• ASEW-103:
• Compression Testing Machine, 2000 KN (200 tonne) cap
• Electrically-cum-manually operate with 3 gauges. 2 or 4 Pillar MODEL. 0-500 KN x 2.5 KN, 0-1000 KN x 5 KN/div. and 0-2000 KN x 10 KN/divn
• ASEW-104:
• Compression testing Machine. Digital 2000 KN x 1 KN least count
• ASEW series Compression Testing machine are the finest of there type obtainable. The rugged construction & extreme simplicity make it possible for even non-technical personnel to operate them with ease and complete dependability. ASEW Compression Testing Machine conform to the requirements international Standards like BS ASTM & Indian Standard IS:516

Some Salient Features:

• High Stability
• Self Aligning
• Platen Suitable for Testing Cubes and Cylinders of various sizes,
• Brick can also be tested
• Digital having function of peak hold facility, memory status
• automatic cut ­off of maximum Load, Alarm generated when the sample breaks down
• Cubes of size 50 mm - 200 mm can be tested, Cylinders 100 mm x 200 mm ht.& 150 mm dia. x 300 mm ht. can be tested

Fully Automatic Compression Testing Machine with all distance platens for 150 mm cube/100 mm cube 150 x 300 mm cylinders, software. The automatic range of 3000 kn capacity compression testing machines has been designed to meet the need for reliable and consistent testing of concrete samples.all labtest machines feature the complete automatic test cycle with a closed loop digital readout. Once the specimen parameters have been introduced, it is sufficient to press the start button to complete the test. Labtest compression machines consist of their main parts: Frame, power pack and data acquisition control system. Each part has been designed to manufacture machines with a high degree of mechanical stability and complies to EN 12390-4, BS 1881 and ASTM C39 (with suitable platen set).

Additional Information:

• Production Capacity: 4 -5 Per month
• Delivery Time: 15 Days
• Packaging Details: Wooden Box Heavy Duty

Our range of Concrete Consistency Testers is mainly used to determine and measure how hard and consistent a given sample of concrete is before curing. These are suitable for operation on 230 volts, 50 cycles, A.C. supply.

Other detail:

• Consistency Of Workability
• ASEW-132:
• Vee-Bee Consistometer : IS : 1199, BS: 1881 (P-104), ASTM C 1170,AASHTO T 126 Consists of a vibrating table, specimen pot, slump cone, graduated Rod and plate. Suitable for operation on 230 volts, 50 cycles, A.C. Supply.
• ASEW-133:
• Slump Test apparatus: IS: 7320.BS 1881-102, BS 5075,ASTM C 143,AASHTO Tl 19 Consists of slump cone fitted with handles and foot pieces in position. Base plate in octagonal shape, Two clamps slide over the foot grips of a standard slump cone and hold It securely while filling and rodding. A combination swivel carrying handle. Complete with graduated tamping rod 0-60 cms long and 16 cms long and 16 mm dia with 0-30 cms
• Accessories
• Slump cone 10 cms top dia, 20 cms bottom dia and 30 cm height
• Tamping rod, graduated 0-60 cms long x 16 mm dia with scale Graduation.

Compression testing Machine. Digital 2000 KN x 1 KN least count with LCD Display Can be attached to PC also

with RS 232 port. Two Pillar model

ASEW series Compression Testing machine are the finest of

there type obtainable. The rugged construction & extreme simplicity make it possible for even non-technical personnel to operate them with ease and complete dependability. ASEW Compression Testing Machine conform to the requirements international Standards like BS ASTM & Indian Standard IS:516

Additional Information:

• Production Capacity: 15
• Delivery Time: 15 days