Riffle Sample Divider
|Number of Chute||14|
|Product type||Sample Divider|
Riffle sample divider IS: 1607-1977; IS: 2720 (P-iv), ASTM C136, D421, D422, BS:812 (part103), 1377, AASHTO T27,
ASEW , Riffle-type sample splitter can be used to divide or halve dry materials such as cement, gravel, powdered ores, aggregate, coal, coke, sand, soils, etc. Material poured into the hopper is divided into two equal portions by a series of chutes that discharge the material alternately in opposite directions into separate pans. Splitter is Mild steel construction it consists of a metal box fitted with a series of chutes of equal width which discharge the material alternatively in opposite directions into separate pans. The chutes of the riffle are steep
enough to allow rapid flow of the material
Complete with two pans and one scoop.
- Item Code: ASEW-084
Vane Shear Apparatus
|Product Type||Shear Apparatus|
Vane shear apparatus, laboratory type, hand operated: IS 2720
(P-XXX), BS 1377.
Complete with set of springs, one each of approx. 2 kg. Cm. 4kg. Cm. 6 kg. cm and 8 kg. Cm & a container, in a nice teak
wooden carrying case
- Item Code: ASEW-087
Digital Concrete Test Hammer Couples
|Size||128 x 128 pixel graphic|
|Measuring range||1,450 to 10,150 psi|
|Product type||Hammer Couples|
The Digital Concrete Test Hammer couples with rebound measuring sensors and microprocessor technology to provide an instrument designed for applications requiring numerous measurements. The method is rapid, reproducible, and has resolution previously unattainable by manual models.
The hammer is connected to a control and display unit. Strength values are shown digitally as they are taken and also displayed as groups of bars on the 128 x 128 pixel graphic LCD. Mean value and standard deviation for a preset number of measurements are computed and displayed. Via the menu display, the user can select: hammer impact direction (up, down, horizontal, etc.); desired engineering units (psi, MPa, kg/cm2, or N/mm2), and indicate the specimen size and type (cylinders, cubes, etc.) for the strength data to be predicted.
The Instrument measuring range is 1,450 to 10,150 psi (10-70 N/mm2) using 2.207 Nm impact energy. Accuracy is ±0.2R with 0.5R reproducibility. Rebound vs. strength correlation curves for 7 and 28 day strengths are installed in memory, or the users own data may be installed via keyboard entry. The Internal memory holds 5000 measurements, each with date and time. Data can be transferred via the RS-232C interface to a PC in Microsoft Excel using the included cable and software. Direct printing is possible.
The Digi-Schmidt consists of the test hammer, control and display unit, PC cable, rubbing stone, instruction manual and a plastic carrying case. Meets ASTM C805. Shipping wt. 12lb. (5.4kg).
Includes a grinding stone, carrying case and instruction booklet
- Item Code: ASEW-128
ASEW Vibrating Hammer
|Item Weight (Kgs)||Approx 50kg|
|Size||140 mm x100 mm.|
|Number of Cycles||50|
convenient Hammer for compacting concrete specimens in cube moulds of different sizes. Electrically operated. Operation on 220V, 1 phase, 50 cycles, AC supply. Complete with Tamping foot 75 mm x 50 mm and tamping foot 140 mm x100 mm.
- Item Code: ASEW-131
Split Spoon Sampler
|Model||IS: 2131; IS:9640|
|Colour||Black and silver|
|Temperature||Upto 130 degree C|
We are the leading manufacturers and suppliers of the
Split Spoon Sampler.
- Item Code: ASEW-075
|Size||15cm x 30cms|
We are the leading manufacturers and suppliers of the
- Item Code: ASEW-123
|Minimum Order Quantity||4 Unit|
|Size||6inches x 2inches|
|Product Type||Capping Set|
ASTM C31, C39, C192, C617; AASHTO T22, T23, T126, T231
For capping 6" dia. x 12" high (152 x 305mm) concrete test cylinders when making compression tests. Simplifies capping process by assuring plane end surfaces are right angles to the axis of the cylinder. The upright is a guide for positioning the cylinder. Molten capping compound is poured into the mould (plate); then cylinder is placed on the capping material. After the compound is set, the capped cylinder is removed for testing. All types of capping compounds can be used with this apparatus. Capping plate is machined and finish-ground from cold-rolled steel to within .002" (.05mm) planeness. Thickness of the capping plate is 3/4" (19mm), to allow regrinding and refinishing after considerable usage should the plate become gouged. Capping plates are round, allowing circular rotation during use that results in uniform wearing down of contacting surfaces for maximum length of service. The frame is machined from high-strength aluminum alloy
- Item Code: ASEW-126
- Production Capacity: 200
- Delivery Time: 10 days
- Packaging Details: one box contain 2 capping set. else depends on size and order.
- Item Code: ASEW068
Single Base Plate Three Gang
|Number of Base||3|
|Colour||Black and blue|
|Product type||Single Base Plate|
Three Gang on a single base plate
Cube Mould, 3-gang, diagonal arrangement, forged bronze. Reinforcing rib prevents spreading. Detachable base plate. For Compression strength tests of Portland cement, mortars, lime and gypsum. ASTM C87, C91, C109, C141, C267, C311, C472, C617, C618, C1073; AASHTO T71, T108
- Item Code: ASEW-124
Vee Bee Consistometer
Vee-Bee Consistometer : IS : 1199, BS: 1881
(P-104), ASTM C1170,AASHTO T 126
a vibrating table, specimen pot, slump cone, graduated Rod and plate. Suitable for operation on 230 volts, 50 cycles, A.C.Supply
- Item Code: ASEW-132
|Size||6 inches x 16 inches|
- Robust construction
- Strong tooth
- Quick and accurate
- Item Code: ASEW-070
Calibration anvil ensures continued test accuracy. For use with all test hammers. Hammers should be periodically checked to determine correct performance . Shipping (18.1kg).
- Item Code: ASEW-129