Associated Scientific & Engineering Works

Our Load Frames are used to apply load on the test specimen. The capacity and speed depends on the requirement of a particular test and these are used in C.B.R. triaxial, unconfined compression test. Further, these are Ideal for using mobile laboratory.

Other details:

• ASEW-047
• Load Frame, Motorised cum hand: Two pillar type. 3 Speeds: Ideal for using mobile laboratory also. Light weight & sturdy.
• This Load frame is designed for conducting Unconfined, Triaxial CBR and other routine tests.
• Loading system comprises of a screw jack with a detachable handle. The lower platen moves up and down. The top bracket is adjustable for vertical clearance and has an adaptor for connecting standard Proving ring.
• A dial gauge mounting bracket is provided on one of the two pillars.
• Rate of strain 1.25, 1.50 & 2.50 mm/min. Suitable for operation on 220 V, 1 Phase, 50 cycles, AC supply.
• ASEW-048
• Load Frame, Motorised cum manually, two pillar type with Single rate of strain 1.25 mm/min. 220 V, 1 Phase, 50 cycles, AC supply.
• ASEW-049
• Load Frame, Motorised, 30 speeds (50 kN) cap.Two Pillar type, Detachable frame, Enclosed motor and gear system, Jewel lamps indicating direction of motion, Speed chart.
• Consists of a cabinet which housed the gear system & motor with sturdy angle iron frame.
• The loading is done through the bottom loading platen, which is carried on a lead screw which advances upwards.
• The top load bracket which slides over two upright pillars, can be positioned at any desired height and locked. It caries a screw adaptor for standard Proving ring. Rate of strains : 30, ( 6 mm/min to 0.00048 mm/min by interchanging the drive and driven gears, another set of 24 rates of strain can be obtained. 220 V, 1 Ph, 50 cycles, AC supply.
• The Loading part of the unit is detachable from the main unit for ease of transport and to avoid damage to the tension rods.
• ASEW-050
• Load frame electrically, 50 kN capacity with 6 rates of strain.
• ASEW-051
• Load Frame electrically, 50 kN capacity with 8 rate of strains.
• ASEW-052
• Load Frame, Hand 50 kN capacity with two speeds.

Consolidation Apparatus 3 Gang
Consolidation Apparatus 3 Gang Model Consists of: Loading Unit mounted on single frame : 3 Nos Consolidation Cell Assembly consists of v Fixed Ring with guide Ring : 3 nos Top Porous Stone : 3 Nos Bottom Porous Stone : 3 Nos Pressure pad : 3 Nos Channeled base with water inlet : 3 Nos Gasket : 3 Nos Water jacket : 3 Nos Set of weights 7 x 0.05 kg/cm 2,5 x 0.1 kg/cm 2, 6 x 0.2 kg/cm 2,6 x 0.5 kg/cm 2, 5 x 1.0 kg/cm 2 : 3 set Water reservoir with plastic tube,T- Connection and pinch cock : 3 No Dial Gauge . 5 mm travel x 0.002 mm least count : 3 Nos

Additional Information:

• Item Code: ASEW-055
• Production Capacity: 15
• Delivery Time: 15 days

Specificadtions:

• Nose: Round; Bowl Vol./Water (oz/cu. in.): 13.5 (24.4); Length: 6-3/4" (172 mm); Bowl Dimensions Width: 4" (102 mm); Depth: 2-1/2" (64 mm); Overall Length: 10" (254 mm)

Additional Information:

• Item Code: ASEW-263
• Delivery Time: 15 days

This apparatus is designed for conducting in-situ Vane Shear test from the bottom of bore hole in saturated cohesive deposits, for determining their in-place shearing resistance.

The equipment consists of a torque applicator assembly mounted on a base.

A gear wheel, which is marked in degrees, holds a torque ring and is geared to a crank. The torque ring has a section cut from it and deforms as torque is applied and the resultant deformation is indicated by a dial gauge.

A pointer is provided for registering the rotation of the vane. A detachable stand is provided to anchor the instrument.

An attachment to securely hold the string of rods is provided.

A calibration curve to convert the dial gauge readings to kg-cm of torque is also supplied.

Additional Information:

• Delivery Time: 1 week

Cone Penetrometer for Soil, IS: 11196-1985, IS: 2720 (P-v)

BS:1377 Automatic (Universal Penetrometer). Dial type electrically complete with Digital Automatic timer, weights 50 & 100 gm. Cone & Penetration cup.

Additional Information:

• Delivery Time: 15 Days

Aggregate Crushing Value test apparatus : IS :

2386 (Part IV)

 

Consists of a 15 cms diameter open-ended steel cylinder, with plunger and base plate. Complete with a tamping rod of circular cross-section 16 mm in diameter and 45 to 60 cms long, rounded

at one end.

Additional Information:

• Production Capacity: 20
• Delivery Time: 15 DAYS

We are offering Sand Equivalent Apparatus, which are equipped with two separate electronic timers to increase accuracy and ease of operation compared to a spring-type timer. It is recommended for samples in the laboratory. These are available bench mounted and designed to meet the requirements of the European &ASTM test methods.

Other details:

• Sand equivalent Apparatus ASTM D 2419, AASHTO T 176
• Consist of Plastic Measuring Cylinder
• Weighted Foot Assembly
• Irrigator Tube
• Rubber Tubing complete with Pinch clip
• Syphone assembly, with 5 litre bottle
• Funnel & carrying Case
• Sand Equivalent Shaker electrically.
• For use in Laboratories performing a large number of test, this Shaker provides a consistent and repeatable oscillation, minimizing variation in test results.
• The unit is available bench mounted and designed to meet the requirements of the European &ASTM test methods.

We offer a wide range of Moisture Meter, which is used for moisture content determination in soil, sand, coal, pottery and cement. The moisture content reading can also assist in planning a project design that will accommodate future changes in dimension caused by changes in relative humidity.

Other details:

• ASEW-029
• Rapid Moisture Meter, IS: 2720 (P-II), IS: 12175. BS 812, ASTM D 4944 AASHTO T 217 Consists of counterpoised balance for weighing the sample, scoop for Measuring carbide reagent,
• A set of steel balls, Calcium carbide reagent 500 gram bottle & a cleaning brush in a nice wooden carrying case. 0-25% or 0-50%.
• ASEW-030
• Infra red Moisture meter, IS: 2720 (P-II). Cap 5 gram approx. Cap. 5 gram approx., Sen: 10 mg approx. Range: 0-100% moisture.
• Content on wet weight basis. Reading accuracy: +_ 0.25%.
• It is portable.
• Supplied complete with one Infra red Lamp and L shaped thermometer. 220 V, 1 Ph, 50 cycles, AC supply.

We are offering Extractors and Trimmers, which consists of a channel base, two slotted side supports, a bracket and a lead screw with locking collar and handle. These are available in both types such as hydraulic and hand operated types and has a capacity 50 KN with plunger and thrust plate for 100 mm dia and 150 mm dia moulds.

Specifications:

• ASEW-082
• Extractor Frame, Hydraulic, hand operated, capacity 50 KN with plunger and thrust plate for 100 mm dia and 150 mm dia moulds.
• Extractor Frame, Universal: Consisting of a channel base, two slotted side supports, a bracket and a lead screw with locking collar and handle.
• Complete with adapter plate and plunger for 38 mm, 75 mm, 100 mm and 150 mm dia tube or mould and one stand to obtain three 38 mm dia samples from the 100 mm dia sample.

We are engaged in offering Gauging Trowels  available in various sizes as per the clients’ specific requirements. These are catering to the requirements of food and agro industry.

 

Other details:

ASEW - 261

• Scoops Stainless Steel/M. Steel
• 250ml.
• 500ml.
• 1000ml.
• 2000ml.
  

  
  ASEW - 262

  • Gauging Trowels 150mm long with handle 200 mm long with handle

  
  ASEW - 263

  • Flexible Spatulas
  • 100mm, 150mm, 200mm, 250mm
    

    We are engaged in offering Gauging Trowels  available in various sizes as per the clients’ specific requirements. These are catering to the requirements of food and agro industry.

     

    Other details:

    
    ASEW - 261
    

    • Scoops Stainless Steel/M. Steel
    • 250ml.
    • 500ml.
    • 1000ml.
    • 2000ml.
      

      
      ASEW - 262

      • Gauging Trowels 150mm long with handle 200 mm long with handle

      
      ASEW - 263

      • Flexible Spatulas
      • 100mm, 150mm, 200mm, 250mmWe are engaged in offering Gauging Trowels  available in various sizes as per the clients’ specific requirements. These are catering to the requirements of food and agro industry.

         

        Other details:

        
        ASEW - 261
        

        • Scoops Stainless Steel/M. Steel
        • 250ml.
        • 500ml.
        • 1000ml.
        • 2000ml.
          

          
          ASEW - 262

          • Gauging Trowels 150mm long with handle 200 mm long with handle

          
          ASEW - 263

          • Flexible Spatulas
          • 100mm, 150mm, 200mm, 250mmWe are engaged in offering Gauging Trowels  available in various sizes as per the clients’ specific requirements. These are catering to the requirements of food and agro industry.

             

            Other details:

            
            ASEW - 261
            

            • Scoops Stainless Steel/M. Steel
            • 250ml.
            • 500ml.
            • 1000ml.
            • 2000ml.
              

              
              ASEW - 262

              • Gauging Trowels 150mm long with handle 200 mm long with handle

              
              ASEW - 263

              • Flexible Spatulas
              • 100mm, 150mm, 200mm, 250mmWe are engaged in offering Gauging Trowels  available in various sizes as per the clients’ specific requirements. These are catering to the requirements of food and agro industry.

                 

                Other details:

                
                ASEW - 261
                

                • Scoops Stainless Steel/M. Steel
                • 250ml.
                • 500ml.
                • 1000ml.
                • 2000ml.
                  

                  
                  ASEW - 262

                  • Gauging Trowels 150mm long with handle 200 mm long with handle

                  
                  ASEW - 263

                  • Flexible Spatulas
                  • 100mm, 150mm, 200mm, 250mmWe are engaged in offering Gauging Trowels  available in various sizes as per the clients’ specific requirements. These are catering to the requirements of food and agro industry.

                     

                    Other details:

                    
                    ASEW - 261
                    

                    • Scoops Stainless Steel/M. Steel
                    • 250ml.
                    • 500ml.
                    • 1000ml.
                    • 2000ml.
                      

                      
                      ASEW - 262

                      • Gauging Trowels 150mm long with handle 200 mm long with handle

                      
                      ASEW - 263

                      • Flexible Spatulas
                      • 100mm, 150mm, 200mm, 250mm

Additional Information:

• Production Capacity: AS PER REQUIREMENT
• Delivery Time: 7 DAYS OR LESS DEPENDS ON ORDERED QUANTITY.
• Packaging Details: SOME EXTRA WILL BE CHARGE ON PACKAGING.