Associated Scientific & Engineering Works

Since our foundation, we are engaged in presenting an outstanding quality array of Tile Abrasion Testing Machine. The machine is used to measure the resistance of bituminous mixture to stripping of the asphalt from rock particles and is generally used to evaluate the mineral aggregate. It may be used to judge the adhesive capacity of bituminous material. Stone screening for use with seal coats or open graded mixes are usually subjected to this test. The test is applied to the aggregate fraction passing the 9.5 mm sieve and retained on no. 8 sieve.

Features:

• Suitable for operation
• Single phase
• Flawless performance

Additional Information:

• Item Code: ASEW-196

We are successfully ranked amongst the topnotch entity offering a wide range of Riffle Sample Divider. The offered divider is consists of metal boxes fitted with a series of chutes of equal width which discharge the material alternatively in opposite directions into separate pans. The chutes of the riffle are steep enough to allow rapid flowing of the material. Double walled, outside made of mild steel, epoxy paint, inside made of stainless steel, 2 air circulating fans, with glass door inside, outer door has magnetic gasket, lock and key and door operated illumination are some of the known parts of the machine.

Features:

• Supplied complete with two pans and one scoop

Additional Information:

• Item Code: ASEW-198

Length Gauge: IS: 2386 (Part-I), BS 812

Constructed from steel, mounted on a hardwood base. For determining elongation index. Particle is elongated when its length (longest dimension) is more than 1.8 of the midsize of the sieve fraction. Aggregate to be classified is separated into seven sieve fractions from 63 to 6.3mm, and each fraction

Additional Information:

• Item Code: ASEW-204

Assisted by a qualified workforce and advanced manufacturing unit, we are engaged in offering a wide range of Accelerated Polishing Machine. This machine has two speed constant mesh gear box driven by an electric motor fully enclosed within the transmission case. The low speed drive automatically comes into action when either the high or intermediate speed is disengaged on light loads, speed changes may be made without switching off. A gear train to provided smooth gear changes and also protects the transmission mechanism. Ball bearings are used throughout which, together with all gears, run in a special lubricant requiring no attention for several years.

Features:

• High tensile strength
• Accurate measurement
• Operator friendly control

Additional Information:

• Item Code: ASEW-193